Laptop computers’ screens are very fragile and can break easily. There are a number of things that can actually go wrong with them. The following steps will detail things that you can do for laptop screen repair.
Step 1
If your laptop computers screen has gone completely blank, there could be a problem with the connection to the video controller on the mother board. The monitor is usually connected via a ribbon cable witch pushes into a socket. Make sure that the ribbon cable is completely connected. Alternatively the ribbon cable could also be loose where it connects to the monitor so check that connection too. If this doesn’t work, then there is probably internal problem with the monitor and it needs to be replaced.
Step 2
If your laptop computers screen is physically broken, then you have to replace it. It is a matter of a set of screws and removing the ribbon cable to take the laptop computers screen out. You can find a replacement screen online through a number of different resources. Make sure that the ribbon cable is replaced properly and that all screws are put back in the correct locations.
Step 3
If you are not comfortable working on your own laptop screen or are concerned that there is a bigger problem than just the screen, then you may want to have a professional look at it. You can either take it to a local electronics store or send it off to be replaced by the manufacturer
No comments:
Post a Comment